PMS (Property Management System)

Summary

A property management system can be configured for use by the Order Entry application.

If no PMS has been configured in Order Entry ECM, the page will default to None in the PMS Interface setting.

To configure a PMS, select from the dropdown list. Additional fields will populate the form.

Setting	Description

Setting	Description
PMS Interface	Default: None Select a PMS system from the dropdown list (e.g., Fidelio PMS)
PMS Card BIN Range	Specifies the BIN range used for cards assigned to the system and allows Order Entry to recognize the cards when swiped Click Add BIN range Enter Low, High and number of digits
Fidelio PMS Settings
Fidelio Host Name	Enter the host name or IP address of the Fidelio FCUI server
Fidelio TCP Port	Enter the port number used by the Fidelio FCUI server
Print alternative name from Fidelio Cruise Web Service	Select to enable the system to connect to FCWS to access non-English names, upload receipts, etc.
Fidelio Cruise Web Service URL	Enter the FCWS URL
User Name	A username and password are required for the specified FCWS. (User name and password may be changed if connected to a different web service.) Enter a user name
Password	Enter a password
Save Cancel Apply	Click Save to save changes and close window Click Cancel to discard changes and close window Click Apply to apply changes and remain on page