...
Install software
Install the latest Logic Controls software:
www.logiccontrols.com/KDS/KDS_Manager/Setup_KDS_3.1.0.2.zipAll other Logic Control Drivers are here:
http://bematechus.com/support/product-drivers/
Installer here as well:
Or you can install from this zip file:
| View file | ||||
|---|---|---|---|---|
|
All other Logic Control drivers are here:
http://bematechus.com/support/product-drivers/
...
Logic Controls Bematech LS6000 Logic eNet I/O Unit - Setup and configuration
Set up all of the LS600 LS6000 control units hardware to power, Monitormonitor, network and bump bar.To set IP addresses to the LS600 unit:
Set IP address to the LS6000 unit
- Use a pen or pointed object to press the reset button on the front of the unit.
- On the bump bar device (below):
- During
- reboot, press the down arrow/scroll button on the bump bar
- .
- From the LS6000 Parameter Setup Screen, scroll to the Ethernet tab using the right arrow/home button
to scroll - .
- .
- Navigate to Ethernet
tabEnter - and enter the IP address by using the numbers on the bump bar.
- Move to next octet by pushing the enter(return) button
on - (to the right
side - of the numbers).
Once - After entering the IP address
entered- ,
scroll with - use the right arrow/home button to scroll to the exit tab
Use the enter button - .
- Press Enter to save and exit.
Configure system on the PC server
After setting up your LS600 units, open up the Logic Controls KDS Software software to begin configuring configure the system on the PC server in the upper control bar. Click on the
- Click Sys Setting
...
- then go to System Settings.
...
...
- Specify the directory where the XML file will be pulled from (Kitchen Output folder) in order to display on the kitchen monitor
- In Order Source, select Files.
- Click the ellipsis (...) to browse for the correct folder.
- For NSOE
...
- , go to: Program Files>Custom Business Solutions> NorthStar Order Entry>Kitchen Output.
...
After setting up the correct Order Source to get the files from, configure the Stations/Kitchen monitors by setting IP addresses.
...
- Set IP addresses to configure the stations/kitchen monitors
- Select LS Setting
- The left panel shows a list of available LS# stations.
...
- These stations will later align directly with the external code set up in ECM.
...
- LS#1 will be entered as External Code (1)
...
- , LS#2
...
- > External Code(2)
...
- , etc.
...
- Double click
...
- the LS# station on the left.
...
- This
...
- launches the Setting pop-up.
...
- From here, all setting configurations are available per station and bump bar.
- From here, all setting configurations are available per station and bump bar.
...
- IP and Screen Mode
...
- The IP address should correspond to the LS unit.
...
- Under Station Function (on the right
...
- ), select Expediter. With this setting, all items from other stations will be sent to this
...
- station, which will act as an Expo screen.
...
- If using this function, there does not need to be a designated station in Order Entry.
...
- External codes: External code (1) is designated as an Expediter station in Logic Controls. External codes can be entered as (2), (3), (4)
...
- .
...
...
...
- Main Screen Property
...
-
- Set up the screen titles and panel display mode.
- Set up the screen titles and panel display mode.
-
...
- Default format is the format that will be displayed on the kitchen monitor.
...
- Bump Bar Key
...
- Assignment
- Choose the appropriate bump bar set up. In this case, it is Option D. These will correspond to the keys on the bar and
- Assignment
...
- the functions assigned to
...
- it.
...
- Click the KEY SET option on the Bump key
...
- to choose the function that corresponds to the key.
...
- Order Property
- To display Server Names on the Logic Control screens, you will have to
- Order Property
...
- set up the Order Property to include Server Name(s)
...
- After completing these settings, Run the program (on the top, left of
...
- LS Setting).
...
...
Database
- To mimic
...
- an existing Logic Controls database from another site, with everything set up in this
...
- document to standardize multiple stores/location, copy the files highlighted below from the existing site's Logic Controls KDS folder (C:\Program Files (x86)\Logic Controls KDS) and drop
...
- them into the Logic Controls KDS folder
...
- on the new site:
...
On the ECM side, there are external codes that need to be associated with the Location/Station in the Area of a Site.
Having a Designated Kitchen Area works well. Then in the Edit screen of the Kitchen Area, add the Kitchen Locations/Stations
...
- This is if you already have an existing setup and want the newly installed location to match your main site's KDS setup.
ECM Setup
In ECM, add Locations to Areas within the site. and add the external codes to the Locations.
- Select the site and go to Areas
- If not already created, add an area called Kitchen.
- Select Kitchen
- Select Locations
- Add the kitchen Locations/Stations
- Select each location and enter the external code that corresponds to the LS# Station built in Logic Controls.
Note: Make sure the Location Type is set to Kitchen
- Kitchen tab - On the Kitchen tab, select the desired settings:
- Presentation mode: set how to show components
- Consolidate like items on kitchen outputs: when multiple like items are ordered, set whether they should be consolidated or displayed separately
- Menu items - To set menu items to display on the Logic Controls monitor:
- Select the menu item, then Print Routing.
- Checkmark the areas where the item should print/display.
.