...
Note |
---|
IMPORTANT NOTE: Before |
...
installing the Customer Display Unit, the site should already have the Lantronix Serial to IP server installed. Directions on how to install that piece of equipment can be found here-> Installing a Lantronix Serial-to-Ethernet Device |
...
Installation Stepssteps:
- Unpack and assemble the the unit.
- The unit should look like this once assembled.
- Open the back rubber part of the CDU with a pair of tweezers and adjust the DIP Switches switches accordingly.
#5 and #7 need to be put in the UP position. All other switches need to be DOWN. - Next, connect the serial cable from the CDU to one of the ports on the Lantronix box.
- Verify the COM Port that you've assigned for this CDU and update in the ECM Peripherals as needed.
- Assign the CDU to a device peripheral in ECM.
- Once all of this is completed, you can need to run a DEPLOY to the site and the . The Customer Display Unit you've attached to the iPad Device will be sending POS terminal (iPad or other tablet) will send orders to it.
COMPLETED!