Versions Compared

Version Old Version 4 New Version Current
Changes made by

Alger Alama

Jason Epp

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

EMV transactions on Verifone VX805 terminals is processed using the NETePay credit card chip reader software.

Info
titleNETePay Installer File

For a zipped file of the most current version of the NETePay Installer for Vantiv, go to Optional Components on NorthStar Order Entry Downloads. 

IMPORTANT: The VX805s have to be set to Serial Communication not USB.

To do this while the vx805 device is starting up…

                                 Image Added

    • After “Initializing… Please Wait…” like above, when it gets to the screen that has the firmware version:
      • Press Alpha + 8 on the keypad at the same time for firmware screen like below:

                                   Image Added

      • Screen will prompt "Select ComPort” > press F1 for “Com 1”:

                                           Image Added

      • Screen will prompt “Select Baud” > press F2 for “9600”:

                                        Image Added

      • Last screen will be “Backlight Display” > select F1 for “On”.
    • Restart the device.

Datacap NETePay Installation Setup

Before proceeding, verify the site's current payment processor by going to the site's Payment tab in ECM or contact Brittany Busse (Unlicensed). 

For this example, Mercury (Vantiv) is used: 

  • Download the proper NETePay  NETePay Installer from the Datacap website: httphttps://www.datacapepaydatacapsystems.com/downloadmenu/download
    • Click
    on
    • NETePay 5.0
    • Click the name of the site's current
    processor - (You can verify this from the site's ECM Payment Tab or from Brittany Busse. We'll be utilizing Mercury as an example for now)
    Image RemovedOnce Mercury is chosen, follow the Steps provided on its installation page
    • processor 

Image Added

    • After selecting Mercury (for this example), follow the steps provided on the installation page, then download and install the software. (
    • Since
    • For this Mercury example
    • is Mercury
    • , the download file is
    • called NETePay
    • called NETePay-MercuryHost50611-Install20151117-W8)
    • Image Removed

Image Added

    Follow the installer and answer the questions and it will ask you
    • After completing the installation instructions, you will be asked to restart the server.

  • Double-click on the NETePay icon that now appears on the desktop.

Image Modified

  • Click Obtain Seral Serial Number - This should automatically approve.Image Removed
    It will inform you that the configuration is not set - Click OK
    Image Removed

Image Added

  • The message "Configuration not set" will display. Click OK.

Image Added

  • Hover mouse over Setup and click on click Setup Information.Image Removed

Image Added

  • Click on Load New Parameters then click Yes after it displays the error message.
    Image Removed
    Click on Load New Parameters. 
  • The prompt "Attempt Activation?" will display. Click Yes.

Image Added

  • Click I Have My Deployment ID   Image Removed

Image Added

  • Enter the Deployment ID (. This is the Password for the Merchant ID in the LIVE site's ECM Payment Tab). 
    • CBS Development has a shared ID that can only be used by one site at a time: CBSCOIRVI

  • If the Deployment ID is correct and verified, it will display the site's information. (If shows an error message appears, then the site's Deployment ID hasn't been approved yet for EMV utilization.)
    Image Removed
  • Finished

 

VX805 Setup:

  • First, verify

Image Added

DSI Drivers

  • Along with the NetEPay application, there are two dsi drivers that need to be installed as well. These are located on the same Datacap web page as NetEPay.
  • These drivers also need to be updated whenever the version of NetEPay is updated. If they are not updated as well it can cause VX805(s) to not work after NetEPay is updated. 
  • You will only need to install/update the dsiEMVUS and dsiPDCX drivers
  • When installing these drivers, run them as administrator and reboot the server after finishing installing them. 

Image Added

VX805 Setup

  • Before you begin VX805 setup:  along with the above
    •  
    • Verify Datacap NETePay installation (above
    first
    • ) has been completed and DEPLOYED to the site

  • Have the VX805 device connected and on hand.
  • On the iPad, open Order Entry. 
    • Swipe to Cashier Menu page; tap Edit Settings. 
    • Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication). 

Image Modified

Image Modified

Image RemovedImage Added

  • The VX805 device will reboot and initialize the software. When complete, Apple Pay will be available in the payment screen by tapping the payment signal icon. 


Image RemovedImage Added

  • After the Rere-Initialization initialization of the VX805, you can use the Chip Reader chip reader at the bottom of the VX805 VX805.
  • Finished

/wiki/spaces/SOFTWARE/pages/141591205