EMV transactions on Verifone VX805 terminals is processed using the NETePay credit card chip reader software.

Datacap NETePay Installation Setup

Before proceeding, verify the site's current payment processor by going to the site's Payment tab in ECM or contact Brittany Busse (Unlicensed). 

For this example, Mercury (Vantiv) is used: 

• Download the NETePay Installer from the Datacap website: https://datacapsystems.com/download
  • Click NETePay 5.0
  • Click the name of the site's current processor 

• • After selecting Mercury (for this example), follow the steps provided on the installation page, then download and install the software. (For this Mercury example, the download file is called NETePay-MercuryHost50611-Install20151117-W8)

• • After completing the installation instructions, you will be asked to restart the server.
    
    
• Double-click the NETePay icon that now appears on the desktop.

• Click Obtain Serial Number - This should automatically approve.

• The message "Configuration not set" will display. Click OK.

• Hover mouse over Setup and click Setup Information.

• Click Load New Parameters. 
• The prompt "Attempt Activation?" will display. Click Yes.

• Click I Have My Deployment ID   

• Enter the Deployment ID. This is the Password for the Merchant ID in the LIVE site's ECM Payment Tab. 
  • CBS Development has a shared ID that can only be used by one site at a time: CBSCOIRVI
    
    
• If the Deployment ID is correct and verified, it will display the site's information. (If an error message appears, then the site's Deployment ID hasn't been approved yet for EMV utilization.)

• • It is imperative that you also put this software on to the Startup of Windows. 
    • You can follow this document on how to add the program to Startup: https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/

DSI Drivers

• Along with the NetEPay application, there are two dsi drivers that need to be installed as well. These are located on the same Datacap web page as NetEPay.
• These drivers also need to be updated whenever the version of NetEPay is updated. If they are not updated as well it can cause VX805(s) to not work after NetEPay is updated. 
• You will only need to install/update the dsiEMVUS and dsiPDCX drivers
• When installing these drivers, run them as administrator and reboot the server after finishing installing them. 

VX805 Setup

• Before you begin VX805 setup: 
  • Verify that you've completed the ECM EMV Setup 
  • Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site
    
    
• Have the VX805 device connected and on hand.
• On the iPad, open Order Entry. 
  • Swipe to Cashier Menu page; tap Edit Settings. 
  • Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication). 

• The VX805 device will reboot and initialize the software. 

• After the re-initialization of the VX805, you can use the chip reader at the bottom of the VX805.
• Finished
  
  

Related articles

/wiki/spaces/SOFTWARE/pages/141591205