...
| Info | ||
|---|---|---|
| ||
For a zipped file of the most current version of the NETePay Installer for Vantiv, go to Optional Components on NorthStar Order Entry Downloads. IMPORTANT: The VX805s have to be set to Serial Communication not USB. To do this while the vx805 device is starting upup…
|
Datacap NETePay Installation Setup
...
- Download the NETePay Installer from the Datacap website: httphttps://wwwdatacapsystems.datacapepay.com/downloadmenu/download
- Click NETePay 5.0
- Click the name of the site's current processor
...
- It is imperative that you also put this software on to the Startup of Windows.
- You can follow this document on how to add the program to Startup: https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/
- It is imperative that you also put this software on to the Startup of Windows.
DSI Drivers
- Along with the NetEPay application, there are two dsi drivers that need to be installed as well. These are located on the same Datacap web page as NetEPay.
- These drivers also need to be updated whenever the version of NetEPay is updated. If they are not updated as well it can cause VX805(s) to not work after NetEPay is updated.
- You will only need to install/update the dsiEMVUS and dsiPDCX drivers
- When installing these drivers, run them as administrator and reboot the server after finishing installing them.
VX805 Setup
- Before you begin VX805 setup:
- Verify that you've completed the ECM EMV Setup
- Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site
- Have the VX805 device connected and on hand.
- On the iPad, open Order Entry.
- Swipe to Cashier Menu page; tap Edit Settings.
- Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication).
...