Page Comparison

...

Info

title	NETePay Installer File

For a zipped file of the most current version of the NETePay Installer for Vantiv, go to Optional Components on NorthStar Order Entry Downloads.

IMPORTANT: The VX805s have to be set to Serial Communication not USB.

To do this while the vx805 device is starting

up

up…

Image Added

- After “Initializing… Please Wait…” like above, when it gets to the screen that has the firmware version

X2.xxxxx.xxxx

.

Select Com 1

Select 9600 Baud Rate.

Select On

Image Added

Image Added

Image Added

Datacap NETePay Installation Setup

Before proceeding, verify the site's current payment processor by going to the site's Payment tab in ECM or contact Brittany Busse (Unlicensed).

...

Download the NETePay Installer from the Datacap website: httphttps://wwwdatacapsystems.datacapepay.com/downloadmenu/download
- Click NETePay 5.0
- Click the name of the site's current processor

...

- It is imperative that you also put this software on to the Startup of Windows.
  - You can follow this document on how to add the program to Startup: https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/

Along with the NetEPay application, there are two dsi drivers that need to be installed as well. These are located on the same Datacap web page as NetEPay.
These drivers also need to be updated whenever the version of NetEPay is updated. If they are not updated as well it can cause VX805(s) to not work after NetEPay is updated.
You will only need to install/

Finished

update the dsiEMVUS and dsiPDCX drivers
When installing these drivers, run them as administrator and reboot the server after finishing installing them.

Image Added

Before you begin VX805 setup:
- Verify that you've completed the ECM EMV Setup
- Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site
Have the VX805 device connected and on hand.
On the iPad, open Order Entry.
- Swipe to Cashier Menu page; tap Edit Settings.
- Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication).

...

After the re-initialization of the VX805, you can use the chip reader at the bottom of the VX805.
Finished