...
- From the LS6000 Parameter Setup Screen, scroll to the Ethernet tab using the right arrow/home button.
- From the LS6000 Parameter Setup Screen, scroll to the Ethernet tab using the right arrow/home button.
- Enter Navigate to Ethernet and enter the IP address by using the numbers on the bump bar.
- Move to next octet by pushing the enter button (to the right of the numbers).
- After entering the IP address, use the right arrow/home button to scroll to the exit tab.
- Press Enter to save and exit.
...
- To mimic a Logic Controls database, with everything set up in this document to standardize multiple stores/location, copy (and drop in) these highlighted files in the Logic Controls KDS folder: C:\Program Files (x86)\Logic Controls KDS
- This is if you already have an existing setup and you don't want to have to go through the hassle of flagging and changing the same options again at your newly installed location to match your main site's KDS setup.
ECM Setup
In ECM, add Locations to Areas within the site. and add the external codes to the Locations.
...