...
Install software
Install the latest Logic Controls software:
www.logiccontrols.com/KDS/KDS_Manager/Setup_KDS_3.1.0.2.zip
Or you can install from this zip file:
| View file | ||||
|---|---|---|---|---|
|
All other Logic Control Drivers drivers are here:
http://bematechus.com/support/product-drivers/
Installer here as well:
| View file | ||||
|---|---|---|---|---|
|
...
Logic Controls LS6000 Logic eNet I/O Unit - Setup and configuration
Set up the LS6000 control units to power, monitor, network and bump bar.
...
Set IP
...
address to the
...
LS6000 unit
...
- Use a pen or pointed object to press the reset button on the front of the unit.
- On the bump bar device:
- During
- reboot, press the down arrow/scroll button on the bump bar
- .
- Scroll to the ethernet tab using the right arrow/home button
- .
- Enter the IP address by using the numbers on the bump bar.
- Move to next octet by pushing the enter button
- (to the right
- of the numbers).
- After entering the IP address
- ,
- use the right arrow/home button to scroll to the exit tab
- .
- Press Enter to save and exit.
Configure system on the PC server
After setting up your LS600 units, open up the Logic Controls KDS Software software to begin configuring configure the system on the PC server in the upper control bar.
- Click
...
- the Sys Setting icon.
To
- Establish directory setting to pull the XML
...
- :
- In Order Source, select Files.
- Click the ellipsis (...) to browse for the correct folder.
- For NSOE
...
- , go to: Program Files>Custom Business Solutions> NorthStar Order Entry>Kitchen Output.
After setting up the correct Order Source to get the files from, configure the Stations/Kitchen monitors by setting IP addresses.
...
- Set IP addresses for configure the stations/kitchen monitors
- Select LS Setting
- The left panel shows a list of available LS# stations.
...
- These stations will later align directly with the external code.
...
- LS#1 will be entered as External Code (1)
...
- , LS#2
...
- > External Code(2)
...
- , etc.
- Double click
...
- the LS# station on the left.
...
- This
...
- launches the Setting pop-up.
...
- From here, all setting configurations are available per station and bump bar.
- From here, all setting configurations are available per station and bump bar.
...
- IP and Screen Mode
...
- The IP address should correspond to the LS unit.
...
- Under Station Function (on the right
...
- ), select Expediter. With this setting, all items from other stations will be sent to this
...
- station, which will act as an Expo screen.
...
- If using this function, there does not need to be a designated station in Order Entry.
...
- External codes: External code (1) is designated as an Expediter station in Logic Controls. External codes can be entered as (2), (3), (4).
...
In the
- Main Screen Property
...
-
- Set up the screen titles and panel display mode.
-
...
In the
- Bump Bar Key
...
- Assignment
- Choose the appropriate bump bar set up. In this case, it is Option D. These will correspond to the keys on the bar and
- Assignment
...
- the functions assigned to
...
- it.
...
- Click the KEY SET option on the Bump key
...
- to choose the function that corresponds to the key.
...
- Order Property
- To display Server Names on the Logic Control screens, you will have to
- Order Property
...
- set up the Order Property to include Server Name(s)
...
...
- After completing these settings, Run the program (on the top, left of
...
- LS Setting).
...
Database
- To mimic a Logic Controls database, with everything set up in this
...
- document to standardize multiple stores/location, copy(and drop in) these highlighted files in the Logic Controls KDS folder.
...
On the ECM side, there are external codes that need to be associated with the Location/Station in the Area of a Site.
Having a Designated Kitchen Area works well. Then in the Edit screen of the Kitchen Area, add the Kitchen Locations/Stations
...
ECM Setup
In ECM, add Locations to Areas within the site. and add the external codes to the Locations.
- Select the site and go to Areas
- If not already created, add an area called Kitchen.
- Select Kitchen
- Select Locations
- Add the kitchen Locations/Stations
- Select each location and enter the external code that corresponds to the LS# Station built in Logic Controls.
Note: Make sure the Location Type is set to Kitchen
.
...