View Source

EMV transactions on Verifone VX805 terminals is processed using the NETePay credit card chip reader software.

For a zipped file of the most current version of the NETePay Installer for Vantiv, go to Optional Components on NorthStar Order Entry Downloads.

IMPORTANT: The VX805s have to be set to Serial Communication not USB.

To do this while the device is starting up, when it gets to the screen that has the firmware version X2.xxxxx.xxxx:
- Press Alpha + 8 on the keypad at the same time.
- Select Com 1
- Select 9600 Baud Rate.
- Select On.
Restart the device.

Datacap NETePay Installation Setup

Before proceeding, verify the site's current payment processor by going to the site's Payment tab in ECM or contact Brittany Busse (Unlicensed).

For this example, Mercury (Vantiv) is used:

Download the NETePay Installer from the Datacap website: http://www.datacapepay.com/downloadmenu/
- Click NETePay 5.0
- Click the name of the site's current processor

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > EMC Datacap 1.jpg

- After selecting Mercury (for this example), follow the steps provided on the installation page, then download and install the software. (For this Mercury example, the download file is called NETePay-MercuryHost50611-Install20151117-W8)

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > EMC Datacap 2.jpg

- After completing the installation instructions, you will be asked to restart the server.
Double-click the NETePay icon that now appears on the desktop.

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > NETePay 1.jpg

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > NETePay 2.jpg

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > image2016-6-27 16:15:33.png

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > NETePay 5.jpg

Enter the Deployment ID. This is the Password for the Merchant ID in the LIVE site's ECM Payment Tab.
- CBS Development has a shared ID that can only be used by one site at a time: CBSCOIRVI
If the Deployment ID is correct and verified, it will display the site's information. (If an error message appears, then the site's Deployment ID hasn't been approved yet for EMV utilization.)

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > NETePay 8.jpg

- It is imperative that you also put this software on to the Startup of Windows.
  - You can follow this document on how to add the program to Startup: https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/

Before you begin VX805 setup:
- Verify that you've completed the ECM EMV Setup
- Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site
Have the VX805 device connected and on hand.
On the iPad, open Order Entry.
- Swipe to Cashier Menu page; tap Edit Settings.
- Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication).

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > VX805 4.PNG

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > initializing verifone.jpg

Order Entry Documentation > VX805 Setup and Datacap NETePay (credit card chip reader software) installation > VX805 8.PNG

After the re-initialization of the VX805, you can use the chip reader at the bottom of the VX805.
Finished