Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Datacap NETePay Installation Setup

  • Download the proper NETePay Installer from the Datacap website: http://www.datacapepay.com/downloadmenu/
    • Click NETePay 5.0
    • Click the site's current processor (You can verify this from the site's ECM Payment Tab or from Brittany Busse. We'll be utilizing Mercury as an example for now)

    • After selecting Mercury (for this example), follow the steps provided on its installation page then download and install the software. (For this Mercury example, the download file is called NETePay-MercuryHost50611-Install20151117-W8)



    • After following the installation instructions, you will be asked to restart the server.

  • Double-click the NETePay icon that now appears on the desktop.



  • Click Obtain Serial Number - This should automatically approve.



  • It will inform you that the configuration is not set - Click OK

  • Hover mouse over Setup and click Setup Information.


  • Click Load New Parameters then click Yes on the message to attempt activation.



  • Click I Have My Deployment ID   


  • Enter the Deployment ID. This is the Password for the Merchant ID in the LIVE site's ECM Payment Tab. 
    • Development has a shared ID that can only be used by one site at a time: CBSCOIRVI

  • If the Deployment ID is correct and verified, it will display the site's information. (If an error message appears, then the site's Deployment ID hasn't been approved yet for EMV utilization.



    • Finished

VX805 Setup

  • Before you begin VX805 setup: 
    • Verify that you've completed the ECM EMV Setup 
    • Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site

  • Have the VX805 device connected and on hand.
  • On the iPad, open Order Entry. 
    • Swipe to Cashier Menu page; tap Edit Settings. 
    • Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication). 





  • The VX805 device will reboot and initialize the software. 


  • After the re-initialization of the VX805, you can use the chip reader at the bottom of the VX805.
  • Finished

  • No labels