| Info |
|---|
| For troubleshooting, see: NorthStar Order Entry: Lantronix + Scale data inconsistency troubleshooting |
This guide is relevant for the following models:
- Lantronix UDS2100 (2-port)
- Lantronix EDS4100 (4-port)
| Multimedia | ||||||
|---|---|---|---|---|---|---|
|
| Info |
|---|
| IMPORTANT NOTE |
...
| : |
...
| If you are installing more than 1 of these Lantronix devices at a location, |
...
| they must be installed ONE AT A TIME. |
...
| Default IP conflicts may occur if |
...
| set up at the same time |
...
| . |
Before starting up the install you will need to , copy these two folders from \\hq-file1\Shared\Install\NorthStar\NorthStar Order Entry\NSOE Peripherals\Lantronix - Serial to IP.
- Device Installer
- Secure Com Port Redirector
Once you've transferred After transferring these two folders to the site on which you're installing the hardware, you will need to install them.
Step 1:
- Open t he Device Installer folder and run the setup_di_x86x64cd_4.4.0.2RC3 program. It's straight forward.
- Once installed click on the Device Installer program and you will see this screen. It should immediately show all the Lantronix devices on the network. If it doesn't populate, you can click on SEARCH on the top left, and it will detect them all.
- You can then click on device itself first and then click on Assign IP. In this option, you can assign an IP automatically or assign a static IP to the boxes
- Once you've assigned a proper IP to the boxes, you can log into their Web Configuration by inputting their IP Addresses in a Web Brower. You can also access their Web Configuration pages in the Device Installer by clicking on the devices and clicking on the Web Configuration tab on the right. Both have a different Web Configuration page:
UDS2100 (2-Port) - You don't need to change any settings.
Web Browser Login: NONE
EDS4100 (4-Port) - You don't need to change any settings
Web Browser Login: admin/PASS
...