Page Comparison

...

Info

title	NETePay Installer File

For a zipped file of the most current version of the NETePay Installer for Vantiv, go to Optional Components on NorthStar Order Entry Downloads.

IMPORTANT: The VX805s have to be set to Serial Communication not USB.

To do this while the device is starting up, when it gets to the screen that has the firmware version X2.xxxxx.xxxx:
- Press Alpha + 8 on the keypad at the same time.
- Select Com 1
- Select 9600 Baud Rate.
- Select On.
Restart the device.

Datacap NETePay Installation Setup

Before proceeding, verify the site's current payment processor by going to the site's Payment tab in ECM or contact Brittany Busse (Unlicensed).

...

- It is imperative that you also put this software on to the Startup of Windows.
  - You can follow this document on how to add the program to Startup: https://www.howtogeek.com/208224/how-to-add-programs-files-and-folders-to-system-startup-in-windows-8.1/
- Finished

Before you begin VX805 setup:
- Verify that you've completed the ECM EMV Setup
- Verify Datacap NETePay installation (above) has been completed and DEPLOYED to the site
Have the VX805 device connected and on hand.
On the iPad, open Order Entry.
- Swipe to Cashier Menu page; tap Edit Settings.
- Tap the box icon on the bottom left, then tap Initialize NFC (Near-Field Communication).

...

After the re-initialization of the VX805, you can use the chip reader at the bottom of the VX805.
Finished